AUDI REMOTE PROGRAMMING

Remote Control Programming (1997 AND UP)

1. Switch Ignition ON and leave the key in the ignition.

2. Mechanically lock the vehicle using

    the Drivers door with a second key.

3. Using the remote control press the Unlock

    button once, and the horn will sound once.

4. Wait 6 seconds and press the unlock button once to activate the

    coding procedure.(The remote control will now be programmed).

    * If programming 2 remotes press the unlock button twice on the

    second remote with one second interval between each press.

    * If programming 3 remotes press the unlock button three times

    on the third remote...etc..etc..

5. Switch Ignition OFF.

6. Remove key from ignition and check for operation.

7. The coding procedure can be repeated up to 4 times for additional

    remotes.

8. The ignition must be switched OFF between programming each

    remote.

REMOTE CONTROL ERASING

(1997AND UP)

1. Switch Ignition ON and leave the key in the ignition.

2. Mechanically lock the vehicle using the Drivers door

   with a second key.

3. Press the remote control unlock button

    5 times in 1 second intervals. A short horn will sound.

4. Wait 6 seconds and press the unlock button once to activate

    memory erase.

5. Switch ignition OFF, all remotes are now erased.