CHRYSLER , DODGE & JEEP

 

      To originate new master key.

      This requires that vehicle to be connected to a special dealer diagnostic 

      equipment.

------------------------------------------------------------------------------------------------------------------------

      TO ADD DUPLICATE KEY. (REQUIRES TWO EXISTING KEYS)

          1- Insert one of the two existing keys into the ignition lock and turn to

           the ON (RUN) position .

          2- After the key has been in the ON position for at least 5 seconds but

          not more than 15 seconds, turn the lock back to (OFF).

          3- Remove the key and insert the second existing key and turn to the

           (ON) position within 15 seconds.

          4- A theft alarm light should illuminate after 10 seconds and a single

          chime sound  will indicate entry into the customer programming mode.

          5- Turn the key to the off position within 60 seconds and remove the

          valid key.

          6- Insert a new key and turn it to the ON position.

          7- After approximately 10 seconds, a single chime will sound and the

            theft alarm light will stop. Wait 5 seconds and turn the key to the OFF

            position.

          8- The above steps must be repeated for additional keys.