THIS SITE IS STILL UNDER CONSTRUCTION PLEASE VISIT US SOON
WELCOME TO PROGRAMMING MY REMOTE
FREE INSTRUCTIONS ON HOW TO PROGRAM YOUR REMOTE
SELECT YOUR VEHICLE
AUDI
BMW
BUICK
CADILLAC
CHEVROLET
FORD
GMC
HONDA
HUMMER
HYUNDAI
INFINITI
ISUZU
LINCOLN
MAZDA
MERCURY
MITSUBISHI
NISSAN
OLDSMOBILE
PONTIAC
SATURN
TOYOTA
VOLKSWAGEN
------------------------------------
OTHER ALARM SYSTEMS
KARR
------------------------------------
Motorcycles
HONDA GOLDWING
------------------------------------
CHIP KEY PROGRAMMING
GENERAL MOTORS
TOYOTA & LEXUS
FORD-LINCOLN
CHRYSLER,DODGE
- Turn the ignition to ACC or ON and the radio to off. Do not crank the engine.
- Press and hold the DISP button on the radio for at least five seconds until settings is displayed.
- Press the SEEK up or down arrows until FOB PROG appears on the display.
- Press the PREV or NEXT button to enter the submenu. The current selection will have an asterisk next to it. BEGIN will be displayed.
- Press the DISP button to start programming. When the message PUSH FOB flashes, press and hold the LOCK and UNLOCK buttons on the first transmitter at the same time for 15 seconds. A chime will be heard to verify the transmitter is learned.
- Repeat Step 5 for each additional transmitter up to four remotes total. You do not need to press the DISP button again, just press down the LOCK and UNLOCK buttons on the next transmitter to be learned to a maximum of four transmitters per vehicle.
To Exit:
1. Press SEEK until EXIT appears on the display.
2. Press the DISP button to exit programming. A chime will he heard to verify the exit.